- Refractory Bricks
- Corundum Plastic Materials
- Refractory Castable
- High Aluminum Refractory Castable
- Light Refractory Castable
- Molten Copper Refractory Castable
- Silica Ramming Mass
- Silicon Carbide Refractory Castable
- Magnesite Basic Ramming Mass
- Refractory molded brick
- Corundum refractory Concrete
- Refractory precast block
- Zirconium refractory Mixture
- Magnesia refractory cement
- Silica Refractory Cement
- Refractory cement
- Fire clay
- Alumina Composite refractory concrete
- Refractory mortar
- Continuous casting Refractory cement
- Silica sand
- Quartz sand for copper smelting
- Molten Copper Refractory Material
- Molten copper ramming mass
- Molten copper refractory castable
- Acid induction furnace lining refractory cenent
- Castable Refractory for natural copper smelting
- Castable refractory furnace lining
- Application of refractory ramming mass
- Refractory materials furnace lining
- Amorphous Refractory Castable
- Molten Zinc Refractory Castable
- Molten Zinc Ramming Mass
- Molten Aluminum Refractory Material
- Ladle Castable
- Special Refractory Ramming Mass
- Accessory Material Refractory (Crystallizer)
- Silica Ramming Mass (GDL)
- Silica Ramming Mass (GYDL)
- Heavy Accessory Refractory Material
- High Strength Refractory Mortar
- Special Ramming Mass
- Light-weight Castable Refractory
- Castable Refractory
- Accessory Refractory Material
- High Grade Composite Silica Ramming Mass
- Corundum Plastic Refractory Cement
- Alumina Composite Ramming Mass
- Silica Refractory Ramming Mass
Melting Channel Prefabricated Lining-Bane of Channel Blocking
In order to improve the lining life, reduce the production cost, improve the management benefit, Gongyi Jinniu Refractory Material Factory developed a new product names melting channel "Prefabricated lining" which is used to improve the service life of the induction furnace siliceous lining and solve the problem of sensor ditch and jams for our users.Gongyi Jinniu Refractory Material Factory currently developed the Melting Channel Prefabricated Lining which is a major improvement of the induction furnace lining. It is coated with a layer of high strength neutral material in the channel outer peripheral of the induction furnace, then use the acidic silica material to make the furnace. It combine the advantages of both the acidic and neutral. The whole set of sensor is siliceous materials, with the outer peripheral prefabricated lining in the middle channel, but it has the effect of the top grade neutral lining.
The Prefabricated Lining can not only solve the problems of channel blocking caused by waste red copper, but also solve the other problems in the processing of copper alloy. For example, the peeling off of the high nickel cupronickel, brass leakage of the zinc and adhesion of bronze. Mainly because of the high purity of the refractory materials. Selecting of the de-slagging materials, the density can be reach to 3.2g/cm³, and the silica sand only has the density of 2.2g/cm³. The porosity is small and anti-permeability; Adapting the top grade resin to combine, which has a good sinter effect; As well as erosion resistance peeling. Using the prefabricated lining is easy to blow in, which lay the foundation to the blowing out and reopen without raw materials. Verified by the dozens of domestic manufacturers, with features of reliable quality and easy usage. Basically eliminate the problems of channel breaking and blocking and can also prolong the service life.
In addition, Gongyi Jinniu Refractory Material Factory closely cooperated with the technical personnel in induction electric furnace manufacturer, the improvement has been made related to the construction of the refractory lining of top furnace body aimed at the thermal insulation properties of the induction electric furnace. Several types including split furnace type, removal type and split combination type has been researched currently. For example, only the break one need to be repaired and others remain the same when the group furnaces shut down. Solving the problems of continuous casting and leaking of casting of copper which can significantly reduce of production costs.
We sincerely hope can cooperate with you!
Gongyi Jinniu Refractory Material Factory
Factory Director: Genfa Niu
Cell Phone: +86-13803825122
Tel: +86-371-64372566 64372588
Taurus Refractory ramming mass Factory mainly engaged in professional manufacturer of development, production and sales of the refractories such as melting copper, aluminum and zinc furnace lining. And supply castable refractory for copper smelting, ramming mass for molten copper,fireclay for copper smelting ,and so on.
Website: http://www.jnrefractory.com
Contact: Mr. Niu
Tel: +86-371-64372566
Fax: +86-371-64372588
Mobile Phone: +86-15137151612
Email: info@jnrefractory.com
gyjinniu@163.com
products list : castable refractory cement for up lead copper rod Molten Zinc Refractory Casting Molten Zinc Ramming Mass Molten Aluminum Refractory Material refractory castable for up lead copper rod Special Refractory Ramming Mass Copper alloy refractory materials for electric furnace acidic refractory for electric furnace body electric furnace refractory material for copper smelting Corrosion resistance Molen Zinc Refractory Castable for up lead copper rod High Strength Refractory Mortar Refractory installation services Fireclay Light-weight Castable Refractory Casting Refractory Accessory Refractory Material Corrosion resistance Quartz sand High Grade Composite Silica Ramming Mass Corundum Plastic Refrctory Alumina Composite Ramming Mass for horizontal continuous casting Silica Refractory Ramming Mass for horizontal continuou casting