Aluminum silicon carbide ramming material refractory cement, plastic construction
Furnace construction
Before building the furnace clean up the slag and debris.
Check the aluminum silicon carbide ramming material refractory cement, plastic or plastic can meet the requirements of construction,Do not use dry hard ramming material, plastic.
When the temperature of the furnace zone is reduced to 35-15 DEG C, the construction and the physical and chemical properties of the material are ensured.
Hole parts to build the furnace at the bottom of the hole (or one end) temporary installation of fixed base, easy to construction.
The furnace side feeding side ramming refractory cement manner, each feeding height should not exceed 5 cm (in furnace ramming refractory cement direction).
Every time after feeding, first with iron (about 16 mm in diameter, head slightly) uniform stab, and uniform ramming refractory cement hammer,This is repeated to the required furnace size, there are conditions for the operation effect of picks is better.
On the furnace side, corner and complex parts to focus on ramming refractory cement, ensure compaction.
Alumina silicon carbide can be plastic as repair material ramming material refractory cement.
Taurus Refractory ramming mass refractory cement Factory mainly engaged in professional manufacturer of development, production and sales of the refractories such as melting copper, aluminum and zinc furnace lining. And supply castable refractory for copper smelting, ramming mass refractory cementfor molten copper,fireclay for copper smelting ,and so on.
Website: http://www.jnrefractory.com  
Contact: Mr. Niu
Tel: +86-371-64372566
Fax: +86-371-64372588
Mobile Phone: +86-15137151612
Email: info@jnrefractory.com
          gyjinniu@163.com
products list : castable refractory cement for up lead copper rod  Molten Zinc Refractory Casting     Molten Zinc Ramming Mass     Molten Aluminum Refractory Material      refractory castable for up lead copper rod    Special Refractory Ramming Mass     Copper alloy refractory materials for electric furnace      acidic refractory for electric furnace body   electric furnace refractory material for copper smelting     Corrosion resistance Molen Zinc Refractory Castable for up lead copper rod    High Strength Refractory Mortar      Refractory installation services Fireclay   Light-weight Castable Refractory    Casting Refractory    Accessory Refractory Material   Corrosion resistance Quartz sand    High Grade Composite Silica Ramming Mass    Corundum Plastic Refrctory     Alumina Composite Ramming Mass for horizontal continuous casting     Silica Refractory Ramming Mass for horizontal continuou casting