- High Alumina Bricks
- Refractory Bricks
- Corundum Plastic Materials
- Refractory Castable
- High Aluminum Refractory Castable
- Light Refractory Castable
- Molten Copper Refractory Castable
- Silica Ramming Mass
- Silicon Carbide Refractory Castable
- Magnesite Basic Ramming Mass
- Refractory molded brick
- Corundum refractory Concrete
- Refractory precast block
- Zirconium refractory Mixture
- Magnesia refractory cement
- Silica Refractory Cement
- Refractory cement
- Fire clay
- Alumina Composite refractory concrete
- Refractory mortar
- Continuous casting Refractory cement
- Silica sand
- Quartz sand for copper smelting
- Molten Copper Refractory Material
- Molten copper ramming mass
- Molten copper refractory castable
- Acid induction furnace lining refractory cenent
- Castable Refractory for natural copper smelting
- Castable refractory furnace lining
- Application of refractory ramming mass
- Refractory materials furnace lining
- Amorphous Refractory Castable
- Molten Zinc Refractory Castable
- Molten Zinc Ramming Mass
- Molten Aluminum Refractory Material
- Ladle Castable
- Special Refractory Ramming Mass
- Accessory Material Refractory (Crystallizer)
- Silica Ramming Mass (GDL)
- Silica Ramming Mass (GYDL)
- Heavy Accessory Refractory Material
- High Strength Refractory Mortar
- Special Ramming Mass
- Light-weight Castable Refractory
- Castable Refractory
- Accessory Refractory Material
- High Grade Composite Silica Ramming Mass
- Corundum Plastic Refractory Cement
- Alumina Composite Ramming Mass
- Silica Refractory Ramming Mass
Ensure quality of construction
Bricks of the factory to be timely avoid the refractory material damp or storage time is too long.
- In the process of brick, missing edge off angle, and surface of the cracks, the brick had not adopted, but also to carry out the construction quality control, finally carried out to verify the masonry work to ensure the quality of masonry.
- The good quality of the new kiln lining/Fireclay , the drying process is the key, it will directly affect the life of brick kiln. From oil and coal mixture to roast.Strict control of heating up speed of 30 ~ 50 degrees C /h (Note: precipitation, time halved)
- The good hanging kiln skin off KH value high C3S content is increased, C2S content is decreased, the Fireclay material is not easy to calcination, the liquid phase is less, not easy to hang kiln skin, and vice versa.The SM value, calcination temperature is high, a small amount of liquid phase, the kiln is not easy agglomeration, not easy to hang the kiln, and the value of SM is too small, large quantity of liquid phase, burning kiln skin easy easy omission which cannot be compared to stability; am value, liquid clinker the viscosity increases, the material difficult to burn, but hang on the kiln than firm, not easy to miss.
- In normal production, to protect the kiln bricks, in fact, is the maintenance of the kiln, should do everything possible to maintain stable conditions, protect the kiln skin.Consolidate raw materials into the factory control, to strengthen the effectiveness of pre homogenization, strict control of raw materials, alkali content, more than the base content of the kiln,skin hanging, off frequency trouble, refractory brick wear and tear, the impact of the cycle./Fireclay
- Stable proportion scheme, manipulation of raw ingredients
- Accuracy and moisture control of pulverized coal.
- The consolidation process operation, operation optimization coefficient, thermal stability and system stability, system condition, reduce the erratic, exemption system frequently start stop
- Good system air leakage sealing treatment, stable raw meal feeding amount;
- The temperature of the furnace outlet temperature is 880 to 870 degrees Celsius, and the temperature of the exhaust gas temperature is controlled at 300 to 330 degrees Celsius.
- Bring up the classic operator
- The kiln collapse is serious, timely remedial process, occasional operation instability or production failure, will have the kiln gap, sometimes in some places missing serious, barrel temperature rising fast
Taurus Refractory ramming mass Factory mainly engaged in professional manufacturer of development, production and sales of the refractory mixture such as melting copper, aluminum and zinc furnace lining. And supply castable refractory for copper smelting, ramming mass for molten copper,fire clay,refractory mortar, refractory cement ,refractory mixture, refractory concrete and silica sand for copper smelting.
Website: http://www.jnrefractory.com
Contact: Mr. Niu
Tel: +86-371-64372566
Fax: +86-371-64372588
Mobile Phone: +86-15137151612
Email: info@jnrefractory.com
gyjinniu@163.com
products list : castable refractory cement for up lead copper rod Molten Zinc Refractory castable Molten Zinc Ramming Mass Molten Aluminum Refractory Material refractory castable for up lead copper rod Special Refractory Ramming Mass Copper alloy refractory materials for electric furnace acidic refractory for electric furnace body electric furnace refractory material for copper smelting Corrosion resistance Molen Zinc Refractory Castable for up lead copper rod High Strength Refractory Mortar Refractory mortar installation services Fireclay Light-weight Castable Refractory castable Refractory Accessory Refractory Material Corrosion resistance Quartz sand High Grade Composite Silica Ramming Mass Corundum Plastic Refractory Alumina Composite Ramming Mass for horizontal continuous castable Silica Refractory Ramming Mass for horizontal continuou castable quartz sand refractory for copper smelting silica sand refractory for core induction furnace refractory concrete block pre-cast refractory block refractory ramming mixture fire clay for up lead copper rod refractory mortar for non core induction furnace refractory cement for copper smelting high grade composite silica mortar silica refractory cement Magnesia refractory cement