Construction technology of refractory castable material
Mixing
Mixing machine mixing and artificial mixing
Mixing dry mixing wet mix
Devices and tools:Forced or mortar mixer, buckets, scales, vibrator, shovel tools, trolleys.
Water consumption for construction:With this batch of products quality inspection list is given the amount of water as the standard.
Temperature requirements and control of construction environment:Construction site temperature must be at 10 degrees -30 degrees Celsius; into the construction site temperature is less than 10 degrees, it is necessary to take the appropriate temperature, warm measures to be constructed.If the temperature is higher than 30 of the construction site shall take necessary measures to cool the construction, otherwise it will cause difficulties in construction or performance decline, it is not suitable for construction.
Dry mix: the bulk material into the mixing machine in dry mix for 2-3 minutes, the white uniform.
Wet mix: according to the provisions of the use of water, said each time required for accurate mixing water into the mix evenly? Dry, stirring time, not less than 3 minutes. The liquid is suitable.
matters needing attention:
The tools used in the process of construction into buckets, shovels and other mixers, must be clean, do not allow the possession of stolen goods debris, Portland cement and so on.
Construction water must be clean tap water.
Every time the amount of mixing is not easy to be too large, according to the type of mixer and set, otherwise it will cause the mixer stuck, stop.
Construction process, the construction of the water is too large.
Light weight castable should not use mechanical mixing, mass pouring material is not easy to use artificial mixing.

Taurus Refractory ramming mass Factory mainly engaged in professional manufacturer of development, production and sales of the refractory mixture such as melting copper, aluminum and zinc furnace lining. And supply castable refractory for copper smelting, ramming mass for molten copper,fire clay,refractory mortar, refractory cement ,refractory mixture, refractory concrete and silica sand for copper smelting.
Website: http://www.jnrefractory.com  
Contact: Mr. Niu
Tel: +86-371-64372566
Fax: +86-371-64372588
Mobile Phone: +86-15137151612
Email: info@jnrefractory.com
          gyjinniu@163.com
products list : castable refractory cement for up lead copper rod  Molten Zinc Refractory castable     Molten Zinc Ramming Mass     Molten Aluminum Refractory Material      refractory castable for up lead copper rod    Special Refractory Ramming Mass     Copper alloy refractory materials for electric furnace      acidic refractory for electric furnace body   electric furnace refractory material for copper smelting     Corrosion resistance       Molen Zinc Refractory Castable for up lead copper rod    High Strength Refractory Mortar      Refractory mortar installation services Fireclay   Light-weight Castable Refractory    castable Refractory    Accessory Refractory Material   Corrosion resistance Quartz sand    High Grade Composite Silica Ramming Mass    Corundum Plastic Refractory     Alumina Composite Ramming Mass for horizontal continuous castable     Silica Refractory Ramming Mass for horizontal continuou castable    quartz sand refractory for copper smelting     silica sand refractory for core induction furnace      refractory concrete block      pre-cast refractory block      refractory ramming mixture     fire clay for up lead copper rod      refractory mortar for non core induction furnace    refractory cement for copper smelting      high grade composite silica mortar     silica refractory cement     Magnesia refractory cement