Zircon refractory cement for intermediate frequency

Zircon refractory cement for intermediate frequency of composition (mass%) was ZrO2 62, SiO2 32, Al2O3 2, Fe2O3 0.5, Bulk density is greater than 3g/cm3,The fire resistance is about 1790,  Maximum particle size 0.5mm.Zircon refractory cement  binding agent for phosphate two aluminum hydroxide, bonding, high strength, high temperature resistance, but easy to dry caking, should not be put for a long time, the skin has a certain corrosive.
Fused alumina zirconia refractory cement for intermediate frequency
Fused alumina zirconia refractory cement is casting of AZS clinker as refractory aggregate.The ingredients of the fused alumina zirconia refractory cement (mass%) are ZrO2 30, Al2O3 48, SiO2 20,Phase is a -al2o3,Mullite baddeleyite, glass phase,Maximum particle size is 5mm.When in use, only need to add water mixing, the volume density is 3.2g/cm3, porosity is 12%, the porosity of weak precipitation, under the temperature of 1400 DEG C to glass corrosion resistant performance is strong, also can be used as a sealing layer and a mud slurry.
Low shrinkage Zircon refractory cement
Low shrinkage Zircon refractory cement is the introduction of a certain amount of chromium containing material in AZS basic composition, volume density of >2.9g/cm3, reheat shrinkage (1400 DEG C, 3H <0.2%),The corrosion resistance of glass liquid is superior to the above two kinds of ramming material, as long as the water is added, it can also be used as sealing layer and pouring material-refractory cement.

Taurus Refractory ramming mass Factory mainly engaged in professional manufacturer of development, production and sales of the refractory mixture such as melting copper, aluminum and zinc furnace lining. And supply castable refractory for copper smelting, ramming mass for molten copper,fire clay,refractory mortar, refractory cement ,refractory mixture, refractory concrete and silica sand for copper smelting.
Website: http://www.jnrefractory.com  
Contact: Mr. Niu
Tel: +86-371-64372566
Fax: +86-371-64372588
Mobile Phone: +86-15137151612
Email: info@jnrefractory.com
          gyjinniu@163.com
products list : castable refractory cement for up lead copper rod  Molten Zinc Refractory Casting     Molten Zinc Ramming Mass     Molten Aluminum Refractory Material      refractory castable for up lead copper rod    Special Refractory Ramming Mass     Copper alloy refractory materials for electric furnace      acidic refractory for electric furnace body   electric furnace refractory material for copper smelting     Corrosion resistance       Molen Zinc Refractory Castable for up lead copper rod    High Strength Refractory Mortar      Refractory installation services Fireclay   Light-weight Castable Refractory    Casting Refractory    Accessory Refractory Material   Corrosion resistance Quartz sand    High Grade Composite Silica Ramming Mass    Corundum Plastic Refrctory     Alumina Composite Ramming Mass for horizontal continuous casting      Silica Refractory Ramming Mass for horizontal continuou casting    quartz sand refractory for copper smelting     silica sand refractory for core induction furnace      refractory concrete block      pre-cast refractory block      refractory ramming mixture     fire clay for up lead copper rod      refractory mortar for non core induction furnace    refractory cement for copper smelting      high grade composite silica mortar     silica refractory cement     Magnesia refractory cement