product list
  1. Home
  2. knowledge
  3. Brief Introduction of Mold Filling refractory cement
Name: Mold filling refractory cement
Characteristics
The refractory cement material is concluded decades of experience, by pre mixing dry refractory cement material evenly with liquid hardening agent, semi dry refractory cement material slurry material and separating agent etc., has the advantages of low temperature baking, convenient construction, high volume stability, anti permeability, easy removal characteristics of copper. Because of good performance of heat insulation furnace crystallizer connected to achieve the biggest advantage is the production of copper products stable quality.

Construction
1. Shi Momo installed, with fiber blanket or asbestos rope to the mould gap between Shi Momo and plugged with tape (also available scale) will seal the mouth of graphite mould.
2. In the mold construction before spraying liquid hardener; poured into the GLS series mold factory production of filling refractory cement material for a part of the use of 3mm sieve, sieve refractory cement material into the mould ready, with wide (5 cm) thick (2 cm) of hard wood the graphite mold around the real fight, with semi dry refractory cement material, with a wooden hammer or hammer (slight vibration vibrator) hard knot forming; higher contact surface (3-5mm), using a ruler rod surface scraping smooth docking, then the undersize mud spatula repair Shi Momo mold, and then put on the mud spatula tool ground plane with smooth, must maintain the best surface smooth docking; beyond the mold surface 1mm, must be smooth.
The natural air dry 8 ~ 12 hours.
3. Llay the mold into the drying furnace, with the baking temperature of 100-200 DEG C for 1-2 days, remove and cool after use (butt blanket refractory mold is smaller than the size).
Matters needing attention
1. Double packing complete shelf life: 3 months;
2. Winter should keep the indoor temperature at 5 DEG to save.

Taurus Refractory ramming mass Factory mainly engaged in professional manufacturer of development, production and sales of the refractory mixture such as melting copper, aluminum and zinc furnace lining. And supply castable refractory for copper smelting, ramming mass for molten copper,fire clay,refractory mortar, refractory cement ,refractory mixture, refractory concrete and silica sand for copper smelting.
Website: http://www.jnrefractory.com  
Contact: Mr. Niu
Tel: +86-371-64372566
Fax: +86-371-64372588
Mobile Phone: +86-15137151612
Email: info@jnrefractory.com
          gyjinniu@163.com
products list : castable refractory cement for up lead copper rod  Molten Zinc Refractory castable     Molten Zinc Ramming Mass     Molten Aluminum Refractory Material      refractory castable for up lead copper rod    Special Refractory Ramming Mass     Copper alloy refractory materials for electric furnace      acidic refractory for electric furnace body   electric furnace refractory material for copper smelting     Corrosion resistance       Molen Zinc Refractory Castable for up lead copper rod    High Strength Refractory Mortar      Refractory mortar installation services Fireclay   Light-weight Castable Refractory    castable Refractory    Accessory Refractory Material   Corrosion resistance Quartz sand    High Grade Composite Silica Ramming Mass    Corundum Plastic Refractory     Alumina Composite Ramming Mass for horizontal continuous castable     Silica Refractory Ramming Mass for horizontal continuou castable    quartz sand refractory for copper smelting     silica sand refractory for core induction furnace      refractory concrete block      pre-cast refractory block      refractory ramming mixture     fire clay for up lead copper rod      refractory mortar for non core induction furnace    refractory cement for copper smelting      high grade composite silica mortar     silica refractory cement     Magnesia refractory cement 
         

Email Us(*)Required information

Address: South 4th Ring Road, Gongyi City, Henan Province, China
Contact: Mr. Niu
Tel: +86-371-64372566
Fax: +86-371-64372588
Mobile Phone: +86-15137151612
Whatsapp: +86-15137151612
Email: gyjinniu@163.com
Website: http://www.jnrefractory.com

Copyright © Gongyi Taurus Refractory Material Factory｜All Rights Reserved. [ Email Login ]