product list
- High Alumina Bricks
- Refractory Bricks
- Corundum Plastic Materials
- Refractory Castable
- High Aluminum Refractory Castable
- Light Refractory Castable
- Molten Copper Refractory Castable
- Silica Ramming Mass
- Silicon Carbide Refractory Castable
- Magnesite Basic Ramming Mass
- Refractory molded brick
- Corundum refractory Concrete
- Refractory precast block
- Zirconium refractory Mixture
- Magnesia refractory cement
- Silica Refractory Cement
- Refractory cement
- Fire clay
- Alumina Composite refractory concrete
- Refractory mortar
- Continuous casting Refractory cement
- Silica sand
- Quartz sand for copper smelting
- Molten Copper Refractory Material
- Molten copper ramming mass
- Molten copper refractory castable
- Acid induction furnace lining refractory cenent
- Castable Refractory for natural copper smelting
- Castable refractory furnace lining
- Application of refractory ramming mass
- Refractory materials furnace lining
- Amorphous Refractory Castable
- Molten Zinc Refractory Castable
- Molten Zinc Ramming Mass
- Molten Aluminum Refractory Material
- Ladle Castable
- Special Refractory Ramming Mass
- Accessory Material Refractory (Crystallizer)
- Silica Ramming Mass (GDL)
- Silica Ramming Mass (GYDL)
- Heavy Accessory Refractory Material
- High Strength Refractory Mortar
- Special Ramming Mass
- Light-weight Castable Refractory
- Castable Refractory
- Accessory Refractory Material
- High Grade Composite Silica Ramming Mass
- Corundum Plastic Refractory Cement
- Alumina Composite Ramming Mass
- Silica Refractory Ramming Mass
Standard for Inspection of Refractory Castables
1. The surface of the water wall and the bottom of the hanging screen and the through wall at the bottom of the dense phase of the furnace shall be completely smooth, uniform thickness, no wear, fall off, linen and drum package phenomenon, cover pipe row without exposed, no mesh crack And penetrating cracks, the crack should be less than 5mm width, when more than 5mm must be demolished for local repair.2. The surface of the cyclone separator and the material in the leg and back material should be completely smooth, uniform in thickness, free of wear, loss, incense and drumming, no cracks and penetrating cracks, such as stratified drums or Crack width should be less than 10mm, when more than 10mm must be demolished for local repair.
3. Furnace Exit Horizontal Flue and Cyclone Separator Horizontal Flue Castable Surface The surface should be completely smooth, uniform in thickness, free of wear, shedding, incontinence and drumming, no cracks and penetrating cracks, such as stratification Drum or crack width should be less than 10mm, when more than 10mm must be demolished for local repair.
4. For the often fall off the castable cover, should take the method of artificial rapping to conceal hidden defects, when there cast material fall, loose, must be demolished for local repair.
5. Anti-wear beam castable surface should be completely smooth, uniform thickness, no shedding, drum bag phenomenon, grasping nails firm, no open welding phenomenon, no cracks and through cracks, cracks should be less than 5mm width, greater than 5mm Must be partially removed repair.
6. Castables at the boiler thermal test point should not interfere with the advance and retreat of the measuring point and change the elevation and angle of the measuring point.
Introduction of our company
Gongyi Taurus Refractory Material Factory is a professional refractory materials manufacturers and refractory materials suppliers,mainly supply Unshaped Refractories,Silicon Carbide Refractory Castable,Castable Refractory Cement,Pouring Material,Castable Refractory Concrete,Silica Ramming Mass etc. series of refractory materials products, sincerely welcome everyone to visit.
Contact information
Contact: Mr. Niu
Tel: +86-371-64372566
Fax: +86-371-64372588
Whatsapp: +86-15137151612
Mobile Phone: +86-15137151612
Email: info@jnrefractory.com