- High Alumina Bricks
- Refractory Bricks
- Corundum Plastic Materials
- Refractory Castable
- High Aluminum Refractory Castable
- Light Refractory Castable
- Molten Copper Refractory Castable
- Silica Ramming Mass
- Silicon Carbide Refractory Castable
- Magnesite Basic Ramming Mass
- Refractory molded brick
- Corundum refractory Concrete
- Refractory precast block
- Zirconium refractory Mixture
- Magnesia refractory cement
- Silica Refractory Cement
- Refractory cement
- Fire clay
- Alumina Composite refractory concrete
- Refractory mortar
- Continuous casting Refractory cement
- Silica sand
- Quartz sand for copper smelting
- Molten Copper Refractory Material
- Molten copper ramming mass
- Molten copper refractory castable
- Acid induction furnace lining refractory cenent
- Castable Refractory for natural copper smelting
- Castable refractory furnace lining
- Application of refractory ramming mass
- Refractory materials furnace lining
- Amorphous Refractory Castable
- Molten Zinc Refractory Castable
- Molten Zinc Ramming Mass
- Molten Aluminum Refractory Material
- Ladle Castable
- Special Refractory Ramming Mass
- Accessory Material Refractory (Crystallizer)
- Silica Ramming Mass (GDL)
- Silica Ramming Mass (GYDL)
- Heavy Accessory Refractory Material
- High Strength Refractory Mortar
- Special Ramming Mass
- Light-weight Castable Refractory
- Castable Refractory
- Accessory Refractory Material
- High Grade Composite Silica Ramming Mass
- Corundum Plastic Refractory Cement
- Alumina Composite Ramming Mass
- Silica Refractory Ramming Mass
Construction Procedures for Refractory Brick Masonry
1. Construction of dynamic furnace
The dynamic kiln masonry must be carried out in the kiln single machine without load test acceptance.
Masonry the basic program is: the starting point of choice, should be from the hot end to the cold end or from the low end to the high-end masonry → operating point clean line scribe → choose brick, according to the hot and cold sections need different materials refractory bricks, Qualified tiles → If you have anchor nails or tiles, ie, anchor or tiles for welding → If there is a thermal insulation layer (such as silicon calcium board, etc.), you need to install the insulation layer → mortar modulation and use, The mortar should be matched with the refractory bricks → Bricks → the reserved and filled the expansion gap.
2. Construction of static furnace
Starting point selection → scribing → selection of brick → according to the requirements of the drawings to anchor and care brick welding → if the insulation layer, should first be installed insulation layer → mortar modulation and use, mortar material should be with the refractory brick Match → masonry with arch, lock brick, remove arch tread → expansion joints reserved and filled.
Introduction of our company
Gongyi Taurus Refractory Material Factory is a professional refractory materials manufacturers and refractory materials suppliers,mainly supply Unshaped Refractories,Silicon Carbide Refractory Castable,Castable Refractory Cement,Pouring Material,Castable Refractory Concrete,Silica Ramming Mass etc. series of refractory materials products, sincerely welcome everyone to visit.
Contact information
Contact: Mr. Niu
Tel: +86-371-64372566
Fax: +86-371-64372588
Mobile Phone: +86-15137151612
Email: info@jnrefractory.com
gyjinniu@163.com
Products list
castable refractory cement for up lead copper rod Molten Zinc Refractory Casting Molten Zinc Ramming Mass Molten Aluminum Refractory Material refractory castable for up lead copper rod Special Refractory Ramming Mass Copper alloy refractory materials for electric furnace acidic refractory for electric furnace body electric furnace refractory material for copper smelting Corrosion resistance Molen Zinc Refractory Castable for up lead copper rod High Strength Refractory Mortar Refractory installation services Fireclay Light-weight Castable Refractory Casting Refractory