product list
- High Alumina Bricks
- Refractory Bricks
- Corundum Plastic Materials
- Refractory Castable
- High Aluminum Refractory Castable
- Light Refractory Castable
- Molten Copper Refractory Castable
- Silica Ramming Mass
- Silicon Carbide Refractory Castable
- Magnesite Basic Ramming Mass
- Refractory molded brick
- Corundum refractory Concrete
- Refractory precast block
- Zirconium refractory Mixture
- Magnesia refractory cement
- Silica Refractory Cement
- Refractory cement
- Fire clay
- Alumina Composite refractory concrete
- Refractory mortar
- Continuous casting Refractory cement
- Silica sand
- Quartz sand for copper smelting
- Molten Copper Refractory Material
- Molten copper ramming mass
- Molten copper refractory castable
- Acid induction furnace lining refractory cenent
- Castable Refractory for natural copper smelting
- Castable refractory furnace lining
- Application of refractory ramming mass
- Refractory materials furnace lining
- Amorphous Refractory Castable
- Molten Zinc Refractory Castable
- Molten Zinc Ramming Mass
- Molten Aluminum Refractory Material
- Ladle Castable
- Special Refractory Ramming Mass
- Accessory Material Refractory (Crystallizer)
- Silica Ramming Mass (GDL)
- Silica Ramming Mass (GYDL)
- Heavy Accessory Refractory Material
- High Strength Refractory Mortar
- Special Ramming Mass
- Light-weight Castable Refractory
- Castable Refractory
- Accessory Refractory Material
- High Grade Composite Silica Ramming Mass
- Corundum Plastic Refractory Cement
- Alumina Composite Ramming Mass
- Silica Refractory Ramming Mass
Refractory Concrete
Advantage
1. The refractoriness of refractory concrete is almost the same as that of refractory bricks of the same material, but because of refractory concrete (castable) without sintering, the initial heating shrinkage, so the load softening point is slightly lower than the bricks. However, on the whole, the performance is better than that of refractory bricks.
2. Refractory concrete is better than the role of low temperature cement material, high temperature compressive strength. At the same time because of masonry integrity, good gas tightness of the furnace, not easy to deformation, the outer shell of the furnace can be canceled, the furnace resistance to mechanical vibration and impact performance brick masonry better. For example, for the upper part of the side wall of the soaking furnace, where mechanical abrasion and impact are more severe, the life expectancy several times higher than the brick.
3. Good thermal stability, most or all of the aggregate is clinker, expansion and shrinkage of the cement offset, so the thermal expansion of the brick is relatively smaller than the brick, the temperature stress is small, and the structure of a variety of networks Like, acicular, chain-like crystalline phase. Strong resistance to low temperature stress. For example, used to pour the soaking furnace mouth and furnace cover, life expectancy extended to a year and a half.
4. The production process is simple, canceled the complex brick process. Can be made of a variety of prefabricated blocks, and mechanized construction, greatly speeding up the furnace speed, bricklaying efficiency than ten times. You can also use waste bricks for aggregate, turning waste into profits.
Introduction of our company
Gongyi Taurus Refractory Material Factory is a professional refractory materials manufacturers and refractory materials suppliers,mainly supply Unshaped Refractories,Silicon Carbide Refractory Castable,Castable Refractory Cement,Pouring Material,Castable Refractory Concrete,Silica Ramming Mass etc. series of refractory materials products, sincerely welcome everyone to visit.
Contact information
Contact: Mr. Niu
Tel: +86-371-64372566
Fax: +86-371-64372588
Whatsapp: +86-15137151612
Mobile Phone: +86-15137151612
Email: info@jnrefractory.com