Lightweight Castable Construction Precautions

1. Template: light castable construction template can be made of steel or hardwood version (plywood), the template should have sufficient strength, good rigidity, do not take shape, do not shift, do not leak pulp, Agents, wood templates to be coated with waterproofing agent, re-use of the template to clean, and then painted before use. The check hole and the cleaning hole are made of wood. The metal reinforcement of the support of the wooden plate should be more than 4 per square meter (to prevent the strong heat transfer) and the reinforcement should be welded on the basis of the anchor (that is, the drawing of the template should be welded to the anchor).

2. Water-cement ratio: stirring light when the amount of water to be strictly in accordance with the instructions, not more than limited, to ensure the construction performance under the premise of adding water should be less should not be more.

3. Mixing: light castable mixing time should be not less than 5 minutes (subject to the requirements of the instructions), the operation to use a forced mixer. Mix the dry mixing should be first dry, then add 80% of the amount of water to stir, and then depending on the degree of wet and dry, slowly add the remaining water to continue to stir until the appropriate degree of work so far. Mix the light castable to clean the mixer.

Introduction of our company

Gongyi Taurus Refractory Material Factory is a professional refractory materials manufacturers and refractory materials suppliers,mainly supply Unshaped Refractories,Silicon Carbide Refractory Castable,Castable Refractory Cement,Pouring Material,Castable Refractory Concrete,Silica Ramming Mass etc. series of refractory materials products, sincerely welcome everyone to visit.

Contact information

Contact: Mr. Niu
Tel: +86-371-64372566
Fax: +86-371-64372588
Whatsapp: +86-15137151612
Mobile Phone: +86-15137151612
Email: info@jnrefractory.com