Ramming Mass

Ramming mass refers to the use of ramming (artificial or mechanical) method of construction, and higher than the heating at room temperature under the hardening of the unshaped refractories. By a certain level of refractory aggregate, powder, binder, admixture with water or other liquid made by mixing. According to the material classification of high-alumina, clay, magnesia, dolomite, zirconium and silicon carbide - carbon refractory ramming material.

Ramming mass to silicon carbide, graphite, electric calcined anthracite as raw materials, mixed with a variety of ultrafine powder additives, fused cement or composite resin made of binder powder body. Used to fill the furnace cooling equipment and masonry gap or masonry leveling layer filler. Smashing, anti-wear, anti-peeling, heat shock, widely used in metallurgy, building materials, non-ferrous metal smelting, chemical, machinery and other manufacturing industries!

Acid, neutral, alkaline ramming material widely used in the coreless frequency furnace, a core induction furnace, as the frequency furnace ramming material used to melt gray cast iron, ductile iron, calcined cast iron, vermicular graphite cast iron and cast iron alloy , Melting steel, alloy steel, high manganese steel, tool steel, heat-resistant steel, stainless steel, molten aluminum and its alloys, melting copper, brass, copper and copper bronze and so on.

According to different blast furnace furnace and different material design requirements, the carbon ramming material is mainly used for the blast furnace bottom carbon brick and the bottom of the sealing plate and between the hearth carbon brick and cooling wall gap, and the bottom of the water pipe The center line above the leveling and cooling wall filling, all parts require ramming material after the carbon ramming material has a certain strength and density, filled with every corner and a small gap, to not leak the molten iron and gas of the requirements, and the thermal conductivity of carbon ramming material and blast furnace hot carbon brick and cooling wall performance to be basically consistent, it will not affect the blast furnace life, so as to maintain the normal production of blast furnace.

Introduction of our company

Gongyi Taurus Refractory Material Factory is a professional refractory materials manufacturers and refractory materials suppliers,mainly supply Unshaped Refractories,Silicon Carbide Refractory Castable,Castable Refractory Cement,Pouring Material,Castable Refractory Concrete,Silica Ramming Mass etc. series of refractory materials products, sincerely welcome everyone to visit.

Contact information

Contact: Mr. Niu
Tel: +86-371-64372566
Fax: +86-371-64372588
Mobile Phone: +86-15137151612
Email: info@jnrefractory.com
          gyjinniu@163.com

Products list 
 
castable refractory cement for up lead copper rod  Molten Zinc Refractory Casting     Molten Zinc Ramming Mass     Molten Aluminum Refractory Material      refractory castable for up lead copper rod    Special Refractory Ramming Mass     Copper alloy refractory materials for electric furnace      acidic refractory for electric furnace body   electric furnace refractory material for copper smelting     Corrosion resistance       Molen Zinc Refractory Castable for up lead copper rod    High Strength Refractory Mortar      Refractory installation services Fireclay   Light-weight Castable Refractory    Casting Refractory